LET THINGS TALK
Line Industry
SiBattery
Real-time identification of the level of distilled water in a lead acid battery.
Overview
SiBattery is a device prepared to identify the water fill level for lead batteries, very easy to use, it detects if the water level in the batteries is lower than desired, and in that case, it sends an alert in real time to the email, to an app, or even to the Telegram application. In case the water has been refilled, it sends another notice alerting that the level is correct again.
OPERATING MODE
The device must be powered between 4 and 12 volts directly from the battery bank, maintaining its polarity, the red wire of the sensor should be routed to the positive terminal of the battery bank and the black wire to the negative terminal. Then open the cap of one of the batteries located in the middle of the bank and insert the sensor.
Route optimisation
Cost reduction
Emission reduction
Alerts
Type | SiBattery |
Dimensions | 25 mm x 56 mm x 85 mm |
Weight | 100g |
Power supply | The sensor is powered by the vehicle battery what is being monitoring |
Operating voltage | Entre 4 y 12v |
Operating temperature | -29º / + 70º |
Protection | IP65 |
Type of communication | Sigfox 868 ó NB-IoT/LTE-M/2g |
* SiBaterry works with an additional sensor from Philadelphia Scientific. | |
Contact us
- Responsible: Signos New Technologies, S.L.
- Purpose: Respond to queries raised by the user and send them the requested information
- Legitimation: User consent.
- Addressees: Transfers are only made if there is a legal obligation.
- Rights: Access, rectify and delete, as well as other rights, as indicated in the Privacy Policy.